24 cores fiber terminal box / fiber enclosure / Fiber distribution
box for SC , LC and suit for Fiber PLC splitter
The FDB is made of high strength materials, UV
resistance,waterproof,maximum capacity up to 24cores,with perfect
space design, a variety of PLC splitter can be installed, it can be
used in indoor and outdoor environment, safe,reliable
,cost-effective, and provide the best solutions for FTTH optical
♦3 Nos. φ12mm ports: 2ports are suitable for inlet/outlet
1 No. φ6-8mm cable for mid-span,1 port is suitable for φ6-8mm cable
♦16 Nos. for 2x3mm drop cable
|Splicing Tray||12/24 fiber per tray|
|PLC splitter||2 Nos. 1:8(or 2:8) Module/cassette/Blockless/Bare PLC splitter|
|No. of Adapter||Max. SC/APC Adapter 24pcs|
Main points during operation
①Insert on 12-24 cores small diameter cable and fix it for
mid-span,insert one 6-12 cores small diameter cable and fix it for
branching,the mid-span fiber coiling in the bottom.
② Fix two 1:8 cassette PLC Splitter and plug the pigtail in the
input adaptor of the splitter.See figure 3.
③ Connect input fiber with splitter input pigtail by fusion
splicing or mechanical splicing at splice tray,and reserved fiber
coiling in the splice tray. See Figure 4.
④ Pre-insert drop calbes to outlet holes in order,then seal it by
soft block and fix it..
See Figure 5.
⑤ Pre-installed the field assembly connector of drop cable,then
insert connector to adaptor in order and tie it.See Figure 6.
⑥If use bare PLC splitter,check Figure7,Figure 8.
⑦Pole mounting: use the hose clamp to fix it on the pole.See Figure
⑧Wall mounting: use the expansion screws to fix it on the wall. See
List of accessories.
|Heat shrinkable protective sleeve||Nos||16|
|PVC adhesive tape||Roll||1|
|Wall mounting kit||Set||1|